如何搭建NTP服务器完成自动同步时间
发布时间:2024-04-11 文章来源:深度系统下载 浏览:
| 1.服务端安装NTP yum install ntp
2.配置NTP
vim /etc/ntp.conf
增加或修改以下红色部分配置命令：
# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).
driftfile /var/lib/ntp/drift
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery
# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1
restrict 192.168.1.0 mask 255.255.255.0
restrict 202.120.2.101
# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (https://www.pool.ntp.org/join.html).
server 202.120.2.101
server 127.127.1.0
fudge 127.127.1.0
server 0.centos.pool.ntp.org iburst
server 1.centos.pool.ntp.org iburst
server 2.centos.pool.ntp.org iburst
server 3.centos.pool.ntp.org iburst
#broadcast 192.168.1.255 autokey # broadcast server
#broadcastclient # broadcast client
#broadcast 224.0.1.1 autokey # multicast server
#multicastclient 224.0.1.1 # multicast client
#manycastserver 239.255.254.254 # manycast server
#manycastclient 239.255.254.254 autokey # manycast client
# Enable public key cryptography.
#crypto
includefile /etc/ntp/crypto/pw
# Key file containing the keys and key identifiers used when operating
 3.启动并查看NTP服务
service ntpd start #启动NTP服务
chkconfig ntpd on #设置开机自启动
netstat -anutp | grep 123 #查看NTP的端口
 4.查看NTP服务状态
ntpstat #查看ntp服务器有无和上层连通
ntpq -p #查看ntp服务器与上层ntp服务器的状态
服务端配置完成，NTP状态正常。
5.客户端安装NTP服务，NTP同步时间
yum install ntp
ntpdate 192.168.1.13
 客户端同步服务端时间成功。
由于虚拟机是采用桥接上网，物理机也可以同步成功。
 近期比较忙，等有空了再附加以下内容，先列出来。
附1：ntpdate和cron的使用
附2：linux的时间、时区的配置
附3：配置NTP时常见错误 |
相关文章
本类教程排行
系统热门教程
本热门系统总排行